Pipe Fitter Calculator

ASME sizes (B16.5, B16.47, B16.9, B18.2.2, B36.10/B36.19) · answers in mm (inch in brackets)

Not available for EN yet.

Fittings to EN 10253 are not available yet. The latest editions (EN 10253-2 and EN 10253-4) changed the dimension tables, and the values are not yet confirmed by two independent sources. Switch to ASME at the top for checked fittings.

Not available for EN yet.

This tab only has checked ASME sizes so far. Switch to ASME at the top to use it.

Not available for EN yet.

This tab only has checked ASME sizes so far. Switch to ASME at the top to use it.

My class walls

Class sheet data here is your own: you type or paste it, and it is stored only on this device (in this browser). It is never sent anywhere. Check it against your current class sheet.

Not available for EN yet.

This tab only has checked ASME sizes so far. Switch to ASME at the top to use it.

How the numbers work

  • All sizes come from published ASME tables in inches and are converted at exactly 25.4 mm per inch, rounded to 0.1 mm.
  • Raised face: ASME B16.5 lists flange thickness and hub length without the raised face. By the standard it is 0.06 in (1.5 mm) for Class 150 and 300 and 0.25 in (6.4 mm) for Class 600 and up. The main number on the Flange tab is measured to the gasket face and includes it; the line under it shows the table value without it. Real flanges often have a lower raised face.
  • Nuts are ASME B18.2.2 heavy hex nuts. "Nut size" is the width across flats, which is the wrench size.
  • Anything not found in a published table shows as "not available". Nothing is guessed.
  • Piping class: type or pick a class name such as BS300. The app reads only the name: first letter = pressure class (A = CL150, B = CL300, D = CL600, E = CL900, F = CL1500, G = CL2500), second letter S = stainless steel, C = carbon steel. For the S classes, 300 = SS316 and 700 = 6Mo as named in the TR2000 European PCS library. The class sets the flange class. No TR2000 class sheet data is included: use "Find class on TR2000" under the piping class field to read the sheet, and "My class walls" to enter wall thicknesses yourself.
  • Pipe schedule and material change only the wall thickness and inside diameter. The outside diameter and all fitting and flange dimensions are fixed per pipe size (NPS).
  • Check the current standard and the supplier drawing before cutting.
  • EN (European): flanges to EN 1092-1, pipe outside diameters and wall thicknesses to EN 10220 (used by EN 10216-2 and EN 10217-1) and nuts to ISO 4032. Only sizes that agree in at least two independent sources or in the standard text itself are shown; the rest show as "not available yet". Fittings to EN 10253 are not included yet. In EN 1092-1 the raised face is included in the thickness and the length through the hub.
  • Flanges above 24" (26" to 60"): ASME B16.47 Series A and Series B, weld neck and blind only. Pick the series below the pipe size. Build height works as for B16.5: the table value without the raised face, with the raised face added. Only values that agree between the standard text and an independent source are shown.

Questions or errors in the data: support@fittercalc.com